Adjustable relative humidity
Change-over contact
High switching capacity
Easily accessible terminals
Clip fixing
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic components is effectively prevented.
Technical Data
MFR 012 | |
Switch difference¹ | +/-5% RH |
Permissible air velocity | 15m/sec. |
Contact type | change-over contact |
Service life | >50,000 cycles |
Min. switching capacity | 20VAC/DC 100mA |
Max. switching capacity | 120VAC to 250VAC,5A |
Connection | 3-pole terminal for 2.5mm², clamping torque 0.5Nm max.: rigid wire 2.5mm²(AWG 14); stranded wire² 1.5mm²(AWG 16) |
Mounting | clip for 35mm DIN rail, EN 60715 |
Casing | plastic according to UL94 V-0, light grey |
Dimensions | 67x50x38mm |
Weight | approx.60g |
Fitting position | variable |
Operating/Storage temperature | 0 to+60℃(+32 to +140℉)/-40 to+60℃(-40to+140℉) |
Operating/Storage humidity | max.95% RH(non-condensing) |
Protection type | IP20 |
¹ at 50% RH
² When connecting with stranded wires, wire end ferrules must be used.
Art.No. | Setting Range | Operating Voltage |
01220.0-00 | 35 to 95% RH | 20VAC/DC, 250VAC |